lug Cast iron/Ductile iron soft seal Center line Butterfly Valves
Size Range: 2~24"(DN50~DN600)
Pressure: PN10, PN16, Class150
Seat Materials: NBR, EPDM, VITON, PTFE
Disc Materials: Ductile Iron, WCB, CF8,CF8M, Al-bronze C958
Stem Materials: SS304, SS316
End Connection: wafer
Operate: Manual, Worm gear, Pneumatic, Electric-Motorized
Disc type: With-pin
Features
vertical center line disc
Anti-Blow Out Stem
Bi-Directional
Fire safe Design
Low Friction Body Seat
Zero Leakage
Standard Test
Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
Special Test: On request, any other test can be carried out according to special instruction by client.
Application
1.Water Treatment Plant
2.Breweries
3.Drilling Rigs
4. Heating & Air Conditioning
5.Paper Industry
6.Chemical Industry
7.Gas Plant
8.Pneumatic Conveyors
9.Sugar Industry
10.Waste Effluent Treatment Plant
11.Cooling Water Circulation
12.Compressed Air
.jpg)